Your First Choice for Medical
Equipment Servicing & Repair

Datrend Biomedical Test Equipment available from Gamidor:

 

Datrend ES601 - Biomedical Test EquipmentES601 Plus

Automated Electrical Safety Analyzer
The Most Complete Testing To IEC60601 2nd And 3rd Editions.

 

 

 

Manual and Automated Testing

Selectable Testing Standards:

  • AAMI-ES1
  • VDE-0751
  • TR62353 (IEC62353)
  • EC601-BAT (IEC60601 for battery-powered medical device)
  • AAMI-BAT (AAMI-ES1 for battery-powered medical device)
  • VDE-BAT (VDE-0751 for battery-powered medical device)
  • TR353-BAT (IEC62353 for battery-powered medical device)
  • IEC61010
  • IEC60601*

* ES601Plus provides the most complete testing to IEC60101, Second and Third Editions

Equipment Control Number and Test Record Data Storage

Automated Control of Peripheral Testing Devices

Large, graphical touch screen display

Over 1 MB of non-volatile memory

Interface to equipment management systems

Maintain over 18,400 control numbers on board

24 editable safety test sequences

6 editable ECG test sequences

11 other autosequence modules for interfacing ES601 Plus to test devices such as defibrillator testers, infusion pump analyzers and pulse oximeter testers

500 editable PM test procedures which can be linked to a control number or run independently

The most complete implementation of international electrical safety standards testing available, with implementation of signal I/O isolation tests and specific tests for battery-powered devices

USB and Ethernet connectivity

Connections for RS-232 barcode scanner and PS/2 keyboard or PS/2 barcode scanner

ES601pc Companion Software

Unleash the full potential of your ES601Plus with our ES601pc Companion Software.

Simply install ES601pc and you're ready to customize your ES601Plus to handle all your automated testing. Included as a Standard Accessory with your Safety Analyzer, ES601pc allows you to view and print Test Reports and to customize Safety Autosequences and ECG / Performance waveform Autosequences.

ES601Plus Automated Electrical Safety Analyzer Represents The Next Generation Of Electrical Safety Testers, Providing A New Era Of Ease-Of-Use And User Flexibility.

 

Datrend Infutest 2000 - Biomedical Test EquipmentInfutest 2000 Series E

Dual-Channel Infusion Device Analyzer
...The Best Solution For Infusion Device Inspection.

 

Better than 1% accuracy on ALL pumps, including Baxter Colleague and Alaris® Signature.

Simultaneously inspect up to four single channel IV pumps or four independent channels of a multi-channel device in just seconds with our Infutest 2000 Series E and optional RSM.

Conduct the full range of flow, pressure, volume and interval tests on practically any fluid delivery system including single rate, dual rate and patient controlled analgesia (PCA) devices.

These tests are performed following easy-to-use manual or autosequence formats using the front panel keypad and graphical display.

Interface Infutest 2000 to our ES601Plus Automated Safety Analyzer or other test systems such as a medTester 5000C with IVPUMP autosequence option

Accurate volume-to-be-infused (VTBI) measurements are a snap with End-of-infusion analysis. EIA calculates the volume infused at the instant the STOP key is pressed or when the autosequence preset test time has elapsed.

SynchroStart accurately captures the initial start-up flow dynamics of your IV pump, an invaluable feature when testing pumps with a pulsatile flow pattern. No need to attempt to start both the IV pump and the analyzer at the same time to make this critical measurement – Infutest 2000 does it for you... Automatically!

Add Infutest RSM for immediate upgrade to a four-channel analyzer. Â No need to send your Infutest in for a factory upgrade.

Better than 1% accuracy on ALL pumps, including Baxter Colleague and Alaris® Signature.

Simultaneously inspect up to four single channel IV pumps or four independent channels of a multi-channel device in just seconds with our Infutest 2000 Series E and optional RSM.

Conduct the full range of flow, pressure, volume and interval tests on practically any fluid delivery system including single rate, dual rate and patient controlled analgesia (PCA) devices.

These tests are performed following easy-to-use manual or autosequence formats using the front panel keypad and graphical display.

Interface Infutest 2000 to our ES601Plus Automated Safety Analyzer or other test systems such as a medTester 5000C with IVPUMP autosequence option

Accurate volume-to-be-infused (VTBI) measurements are a snap with End-of-infusion analysis. EIA calculates the volume infused at the instant the STOP key is pressed or when the autosequence preset test time has elapsed.

SynchroStart accurately captures the initial start-up flow dynamics of your IV pump, an invaluable feature when testing pumps with a pulsatile flow pattern. No need to attempt to start both the IV pump and the analyzer at the same time to make this critical measurement – Infutest 2000 does it for you... Automatically!

Add Infutest RSM for immediate upgrade to a four-channel analyzer. Â No need to send your Infutest in for a factory upgrade.

DTP-5 Companion Software

Infutest 2000 comes complete with Windows (98/2000/XP) based data transfer program

(DTP-5) for quick and easy data transfer, graphical analysis, autosequence editing, plus organization and printing of test results.

Infutest Is The Best Solution For Infusion Device Testing.

Datrend Products from Gamidor